Velleman-projects K8049 Assembly instructions Manual do Utilizador

Total solder points: 53 Difficulty level: beginner 1 2  3 ⌧ 4  5  advanced 15 Channel IR transmitter ILLUSTRATED ASSEMBLY MANUAL H80

10 At first power up, mode 1 is automatically selected.  Press and hold SHIFT to change mode. Led starts flashing.  Press button 1..8 to select

11 14. PCB layout. PCB

VELLEMAN KIT NV Legen Heirweg 33 9890 Gavere Belgium Europe Info ?: http://www.velleman.be Modifications and typographical errors reserved © Vellema

Specifications: • Power supply : 3 AAA batteries • Up to 15 channels can be operated. • Dimensions : 150 x 58 x 22mm / 5,9 x 2,3 x 0,86” Features:

3 Assembly hints 1. Assembly (Skipping this can lead to troubles ! ) Ok, so we have your attention. These hints will help you to make this project s

4 1.3 Soldering Hints : 1- Mount the component against the PCB surface and carefully solder the leads 2- Make sure the solder joints are cone-s

5 9mm 9mm  LD2 : 3mm RED First : Bend the leads exactly like the drawing. (Fig 1.0) Next : Mount this LED like in the drawing (fig. 2.0

6 Construction  T1 : BC639  Attention : Mount the transistor on the solder side! Now bend the transistor towards the pcb, away from

7  Now place the battery contacts into the housing on their right places.  Connect now the wire that you earlier have mount

8  First bend the battery lips over before closing the enclosure.  Close the enclosure with the supplied screws. 10. Assembly Assembly FIG. 9.

9 11. Keyboard Layout Keyboard layout 1 3 5 7 2 4 6 8 SHIFT 5 6 7 8 1 2 3 3 Mute Power Volume up Preset up Volume down Preset down Source Tun